Epoxy Thiner is a blend of solvents designed to thin IC-A1XXX Metalite Epoxy Topcoat and IC-A6XXX Metalite DTM Epoxy Mastic.

Sin descripción

UNIVERSAL METAL PRIMER –is a high-performance, rust-inhibiting, quick-drying primer for iron and steel. Its modified alkyd resin formulation makes it suitable as a universal primer under two-part epoxy and urethane topcoats. It also serves as a barrier coat (tie-coat) over conventional coatings that may be sensitive to strong solvents in ...

SEAL PRIMER 167 – Is a high-performance, two-component, chemically-cured 100% solids epoxy penetrating sealer. This product improves the maintenance painting process by penetrating and sealing crevices, joints, back-to-back angles in existing structures, and edges of old coatings, extending the service life of the maintenance system. It a...

OXI PRIMER - is a waterborne rust converter that stabilizes rust, prevents further corrosion, and prepares surfaces for painting. Use this product where traditional surface preparation cannot remove rust by mechanical methods or sandblasting. It MUST BE TOPCOATED with either alkyd, water-based acrylic, latex, epoxy, or urethane coatings

DTM MASTIC EPOXY HS – Is a high-solids polyamide two-component mastic DTM that is a service-tolerant epoxy coating. This formula is designed for properly prepared metals such as ferrous metals, non-ferrous metals, galvanized metal, and concrete. This product offers superior corrosion protection. Two coats can be applied in as little as 12...

CLEANER & DEGREASER – A biodegradable high-performance cleaner and degreaser for concrete, masonry, asphalt, and other hard surfaces to remove oil, grease, and dirt. Also suitable for other substrates to remove contaminants before painting, including ferrous and non-ferrous metals. Cleaner & Degreaser meet CSP1 and SP1 cleaning st...

ACRYLIC ALIPHATIC URETHANE HS – This two-component acrylic aliphatic polyurethane coating provides excellent gloss and color retention. The product cures to form a tough, abrasion-resistant film that demonstrates exceptional exterior durability, chalk resistance, color stability, and sustained gloss retention. The resulting film is both d...

3 IN 1 DTM ALKYD ENAMEL– Fast-Drying Direct-to-Metal (DTM) Alkyd Enamel designed to provide corrosion protection, excellent color and gloss retention, and good adhesion on lightly rusted steel surfaces

Zone Marking & Traffic Paint is an exterior and interior fast-drying paint for marking parking lots, warehouses, traffic lanes, and other areas where colored designation is desired. 

Synergy Elastomeric is a premium-quality exterior coating designed with excellent elongation and film strength that can bridge hairline cracks and smooth rough surfaces. Synergy Elastomeric can be applied in a waterproofing system to protect against wind-driven rain. For use on concrete, stucco, and masonry. 

Steel Clad Extreme Enamel is a fast-drying, highly adaptable maintenance coating suitable for both exterior and interior applications. Steel Clad Extreme is formulated as a Direct-to-Metal application, specifically for metal surfaces that may not be perfectly prepared, formulated for superior flow and leveling properties, ensuring a ...

GPS Block Filler is a high quality interior and exterior primer designed with a heavy body to fill porous masonry and create a smooth surface.

Synergy Dryfall is an interior flat latex finish formulated for spray application on commercial surfaces such as drywall, wood, concrete, masonry, and metal. When applied at the recommended height, overspray dries before reaching floors, machinery, or equipment and can be easily removed by sweeping or vacuuming.

URETHANE THINER  is a blend of solvents designed to thin IC-A5XXX Metalite Acrylic Aliphatic Urethane HS.

CONCRETE & GARAGE 1K EPOXY – One-component acrylic-epoxy waterborne paint for floors and walls. Designed for coating concrete, brick, stone, and other masonry surfaces. Ideal for garage floors, playgrounds, schools, hospitals, and similar high-traffic areas. Formulated to resist hot-tire pickup in as little as 3 days

Rocket Industrial Enamel – A premium acrylic modified alkyd gloss enamel. It is suitable for both interior and exterior applications, including OEM finishing or refinishing of industrial, construction, and agricultural equipment, as well as a variety of architectural metal applications. It is designed for exterior or interior applications...

Steel Clad Enamel – a highly adaptable maintenance coating suitable for both exterior and interior applications. Steel Clad is formulated as a Direct-to-Metal application, specifically for metal surfaces that may not be perfectly prepared—formulated for superior flow and leveling properties, ensuring a smooth and consistent finish. Extra ...

Color Sample is a premium quality interior and exterior low sheen paint designed for accurate color representation. Excellent for use on most surfaces to help visualize color, evaluate the impact of light, and choose the right shade.

ALTIMA Interior is a line of super-premium interior enamels designed for use on walls, trim and accents where a durable and washable epoxy-like finish is desired. Created with a 100% acrylic, stain and mildew resistant formula that can hold up to repeated washing. ALTIMA is ideal for high traffic areas, hallways, kitchens and bathrooms al...

Regent is a line of high quality interior latex paints and enamels designed to provide premium performance, excellent coverage, and easy application in a very low VOC formula. Excellent for use on walls, trim, and ceiling surfaces in residential, commercial, and maintenance applications. Regent can be used on drywall, plaster, masonry, me...

SILKTONE is a line of professional quality latex paints and enamels designed as a decorative finish with dependable performance at a very low VOC. Good for use on walls, trim, and ceiling surfaces in residential, commercial, and maintenance applications. SILKTONE can be used on drywall, plaster, masonry, metal, wood, and hardboard. A good...

ALTIMA Interior Ceiling is a premium quality interior flat that provides easy application, great hide, and a uniform appearance on ceiling surfaces. Designed with a self-priming, low spatter formulation that diffuses light and hides imperfections for a flawless finish look. Can be used on drywall, plaster, wood, masonry, metal, and acoust...

Vangard is agroundbreaking waterborne coating designed with a high-hide formula that provides excellent UV protection and rapid moisture resistance. Perfect for projects that need exceptional hide and coverage or when weather can be harsh and unpredictable. Excellent for use on high-end residential homes and commercial buildings where a l...

Altima is a family of premium quality exterior paints designed for excellent weathering and a lasting impression. Created with a 100% acrylic formula to provide outstanding color and gloss retention. Great for use on walls, trim, accents and doors in residential and commercial applications. Altima can be used on stucco, masonry, metal, wo...

Regent is a line of high quality exterior paints and enamels designed to provide a smooth, beautiful finish with lasting durability. The self-priming, easy to touch up formula helps reduce application time. The mildew and UV resistant finish keeps surfaces looking better for longer. Excellent for use on walls, trim, and accents in residen...

A high-quality interior and exterior paint that provides easy application, good hide and durability. 

Vangard HP es un esmalte de primera calidad para interiores y exteriores, diseñado para proyectos arquitectónicos y de industria ligera de alto rendimiento. Su fórmula de copolímero modificado proporciona excelente cobertura, adhesión y durabilidad, además de un secado rápido para una entrega rápida del proyecto. Ideal para gabinetes, pas...

HERITAGE DTM is a high performance, single-component waterborne coating that provides a smooth, durable finish over a variety of metal surfaces including iron, steel, galvanized and aluminum. The self-priming formula provides superior adhesion, outstanding corrosion resistance, and long-lasting UV protection. Perfect for doors, handrails,...

Heritage Enamel is a line of super-premium interior and exterior enamels designed for use on trim and accent areas where a smooth, self-leveling, and durable finish is desired. Created with a unique urethane-alkyd resin to provide a long-lasting finish that outperforms standard enamel coatings. This user friendly, waterborne formulation i...

HIGH HIDE PRIMER is a premium quality interior primer and sealer designed to provide excellent uniformity, hide, and enamel holdout in a very low VOC formula. It can be used on drywall, concrete, plaster, and some wood surfaces.

 Drywall Primer is a high quality interior PVA primer and sealer designed to uniform surfaces and provide good enamel holdout for an even topcoat appearance. It can be used on drywall, concrete, plaster, and some wood surfaces. 

QuickSand Primer is a fast-drying primer designed for interior surfaces where a smooth finish and uniform topcoat are required. It sands with minimal effort and can be used on most unpainted interior substrates including wood, MDF, masonry, and drywall.

 PERFORMANCE FEATURES Seals Drywall & Wallboard Uniforms Surfaces Fast Drying 

Universal Primer is a premium quality interior and exterior acrylic primer for general use on wood, masonry, drywall, and non-ferrous metal surfaces. Designed to block stains, promote adhesion, and develop a uniform topcoat appearance.

 Multi-Purpose Primer is a high quality primer designed to seal new surfaces, block mild stains, and aid in changing topcoat colors. It can be applied to wood, masonry, drywall, aluminum, galvanized, and much more. 

Adhesion Plus Primer is a high performance, interior and exterior bonding primer that provides maximum adhesion to hard, dense, and glossy surfaces. The easy to apply formula also sands to a smooth finish with minimal effort. Perfect for wood, aluminum, galvanized, fiberglass, tile, previously painted surfaces, and much more.

Metal Primer is a high performance, single-component waterborne coating that provides a smooth, durable finish over a variety of metal surfaces including iron, steel, galvanized and aluminum. The self-priming formula provides superior adhesion, outstanding corrosion resistance, and long-lasting UV protection. Perfect for doors, handrails,...

Synergy Multi-Seal is a high quality interior and exterior clear penetrating sealer designed for use on wood, drywall, masonry, concrete, stucco and metal in a wide variety of applications. Excellent for use as an undercoater when applying elastomeric or architectural latex topcoats.

Synergy Primer is a premium quality acrylic primer designed to promote adhesion, resist alkali burn, and seal porous masonry. Excellent for use on concrete, stucco, brick, fiber cement board, or other bare masonry surfaces.

Quick drying alkyd primer.